- Подшипник оптовиков
- Цилиндрические роликовые подшипники Подшипники скольжения SINGLE-ROW TAPERED ROLLER BEARINGS NSK
Русский язык
English
العربية
Deutsch
Ελληνικά
Español
Français
Bahasa Indonesia
Italiano
日本語
Português
Shqip
Svenska
ไทย
Türkçe
Українська
- Адрес258 подшипник оптовиков центр Хилл, Сингапур 628925
- Адрес завода258 подшипник оптовиков центр Хилл, Сингапур 628925
- рабочее время9: 00-18: 00 (بتوقيت بكين)
- Рабочий телефон(рабочее время)+6531591338
- Рабочий телефон(Нерабочее время)+6531591338
- Факс +6531591338
Tapered Roller Bearings double-row TNA
Отправить запросTapered Roller Bearings double-row TNA
While being similar to the TDO bearings, the TNA bearings have inner race narrow faces which are extended to abut and eliminate the requirement for a separate inner race spacer. These bearings have in-built clearance to provide a standard setting range and offer a solution for many floating or fixed bearing applications which require simplicity of assembly.
They have an ID size range between 25.400mm and 1200.150mm (1"-47.25") and OD size from 30.480mm to 2460mm (1.2"-96.8504"). They have a double cup and two single cones. The front faces of the cones can be extended so that they contact each other in order to control the internal bearing clearance.
Chamfers are featured in the bores at the front faces of the two single cones (SW variation) to form a lubrication groove. A backface rib design is featured (SE variation) to accommodate stamped closure or radial lip seals.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|